The Intrepid 5 is a tent for up to five people with two rain-protected entrances and a large vestibule. It has three external flat pole sleves. These are easy to handle, cause less wind-resistance and thus minimize wind noise. The additional sleeping cabin has an adequate length for one person. The bracket holder construction creates more space in the cabin so that the entire area of the cabin can be optimally utilized. The sleeping cabin can be installed or unhooked when the tent is set up, so you can enlarge the vestibule completely as you like. The D-shaped inner tent entrance in the upper third consists of mosquito net. Inner tent pockets and a mosquito net Gearloft provide quick access to gear. The four apex vents on the fly allow for optimal ventilation. The tent is very aerodynamic and thus very stable.
|Packing Size||62 x 28 cm|
Are you searching for a tent you can take to the lake, beach or mountains? And weight is not an issue because you are travelling by bike, car or motorbike? Do you value excellent craftsmanship, functional details and high standards of comfort? Then look no further than the tents in our Travel Line. They satisfy all the needs of the weekend camper and the ambitious trekker alike. Whether tunnel or geodesic, Travel Line's 1 to 5 person tents all have practical entrances, generous sleeping lengths and plenty of storage space.
|Flysheet||Rip Stop Polyester, PU coated, 5000 mm w.c., tearing resistance 2.5 kg|
|Inner Tent||Polyester 70D, 185T, waterresistent, breathable|
|Floor||Polyester 75D, 210T, PU coated, 7000 mm w.c.|
|Tentpoles||Aluminium 7001 T6, bolt tip|
|Tentpegs||Solid Pin Peg (Aluminium)|
Especially at a polyester fabric with a PU coating, it is helpful if the stress points are supported. As a result, the force does not act selectively, but is spreaded over a larger area.
The guy ropes are reflective. They can be adjusted with the help of the Linelock and the guyline flags ensure that the lines are clearly visible and always in order.
With the help of apex ventilation flaps air flow is increased between the inner and flysheets, helping regulate humidity and temperature. They are securely sewn into the seams. They do not have to pulled open and can be closed with Velcro fastenings to prevent them flapping noisily in the wind.
The pole-endtips and pole-channels are color coded for easy pitching
The inner tents have a rectangular cut and do not taper at the foot end. A rectangular floor plan is particularly useful for thick sleeping mats so that the mats do not overlap at the foot end.
Double loops allow two different tensioning options.
The inner tent is made of a breathable and water-repellent fabric, which enables condensation water not to penetrate the inside of the tent, but rolls off the outside of the inner tent. The door of the innertent are equipped in the upper half with mosquito net. This ensures a good exchange of air without causing an uncomfortable draft in the tent.
The connection between the inner and outer tent is practical and sustainable. The rubber can be knotted tighter or easily replaced if necessary.