Lankwitzer Straße 17-18
The Halos is a 2-3 person geodesic tent with poles on the outside. That means that you can put up the whole tent at once (the inner tent is hung inside). The three poles cross at the upper roof area. One of the intersections is higher than the others, which allows rainwater to drain off and provides exceptional stability against the wind. Two of the three poles are attached with pole sleeves on the upper roof only and with clips at the lower area, which makes setup considerably easier. The fly sheet has five sealable apex ventilation flaps. The front larger vestibule has an additional arched pole, and when opened, the door can be hung up with two separate poles. The smaller rear vestibule is simply pulled taut with a stake. The inner tent is designed to allow enough space for three standard thermomats (sleeping mats) (183 X 53 cm), with additional space at the head and feet areas for gear. The inner tent has 12 pockets to stash stuff. Both of the doors on the inner tent are D-shaped, and made half of mosquito mesh. Due to the steep walls, the Halos has an effective length of 220 cm. Here you find the Set Up Video.
|Size Inner Tent (LxWxH)||220 x 230 x 125|
|Packing Size||48 x 18|
Zero G light tents on a new level
Are you searching for a tent to take on long trips up mountains and along valleys, through wind and rain and snow? Do you have to count every ounce you take with you because you and you alone are doing all the carrying? Do you value excellent craftsmanship, functional details and high standards of comfort? Then look no further than the tents in our Zero-G Line. Thanks to their eco-friendly, anodised aluminium poles they are perfectly suited to protect you against the elements. All the fabrics we use are extremely durable and tear resistant. Whether tunnel or geodesic, Zero-G Line's 1 to 4 person tents all have practical entrances, generous sleeping lengths and plenty of storage space.
|Flysheet||Ripstop Nylon 20D, siliconised on both sides, water column 3000 mm, tearing strength: 7kg|
|Inner Tent||Ripstop Nylon 20D, water repellent, breathable|
|Floor||Ripstop Nylon 30D, PU coated, water column 5000mm, taped seams|
|Mosquitonet||20 D Nylon NoSeeUm|
|Tentpoles||Aluminium 7001 T6|
The guy ropes are made of extremely high tensile strength Dyneema. Woven-in reflective threads ensure better visibility of the guy ropes. The linelocks enable simple and safe adjustment.
With the help of apex ventilation flaps air flow is increased between the inner and flysheets, helping regulate humidity and temperature. They are securely sewn into the seams. They do not have to pulled open and can be closed with Velcro fastenings to prevent them flapping noisily in the wind.
The pole-endtips and pole-channels are color coded for easy pitching
The connection between the inner and outer tent is practical and sustainable. The rubber can be knotted tighter or easily replaced if necessary.
These buckles make connecting the inner tent to the flysheet child's play. Even without additional staking you can tighten the flysheet with one hand, because the buckles are attached in the pull direction.
The inner tent is made of a breathable and water-repellent fabric, which enables condensation water not to penetrate the inside of the tent, but rolls off the outside of the inner tent. The door of the innertent are equipped in the upper half with mosquito net. This ensures a good exchange of air without causing an uncomfortable draft in the tent.
Double loops allow two different tensioning options.
The peg loops are adjustable. Thus, the tent is easy to tighten and the pegs can be set flexibly.
Adjustable peg loops helps you to tight your tent easy and and pegs can be set more flexible. (Tempest, Halos, Pioneer)
The inner tents have a rectangular cut and do not taper at the foot end. A rectangular floor plan is particularly useful for thick sleeping mats so that the mats do not overlap at the foot end.
At the Tempest, Pioneer, Halos and Bella, the inner tent can remain attached to the outer tent. This makes a combined setup, quick and easy.
At the Tempest 3 and 4, the rear end of the tent can be converted into a large vent.